Ancon 500 Tension Systems
The Ancon 500 is a high performance tension system. It is available in various diameters from 8mm to 42mm in both carbon steel and stainless steel.
All components of the system can be supplied in a variety of finishes to provide corrosion resistance and to meet the demanding aesthetic requirements of many architectural applications. The bar used in this system has a minimum yield of 500MPa.
Ancon 500 System - Stainless Steel
|Design Resistances (kN)||17.4||28.8||52.0||84.2||152.4||188.8||300.2||406.1||543.0|
Ancon 500 System - Carbon Steel
|Design Resistances (kN)||14.7||24.3||36.3||58.9||79.1||133.7||207.6||262.3||371.4|
Surface finish is usually an important factor in applications using stainless steel. Ancon bars are bright drawn as standard but can be hand polished if required. The stainless steel forks and locking nuts can be supplied electro-polished, satin-polished or hand polished.
Isolation material is supplied as standard with the stainless steel system to enable its fixing to a connecting plate of a dissimilar metal. Each stainless steel fork connector is supplied with two clear, self-adhesive, PET (polyester) washers to be applied around the fixing hole either side of the structure. Stainless steel pins feature a PTFE coating around the barrel.
Ancon is proud to announce the launch of its new company and brand logos as part of its on-going evolution.
Ancon is exhibiting at the 2016 NZ Bridges Summit on 1st - 2nd November in Auckland. The conference is endorsed by the NZ Transport Agency (NZTA) and we will be showcasing our BT range of threaded reinforcement couplers, our MBT range of bolted couplers and various Lifting Systems including our brand new EdjPro Narrow Anchor system.