North South Bypass Tunnel - Lindapter
Lindapter steelwork fixings simplify construction of ramps for Australia's longest tunnel
Lindapter steelwork clamps are simplifying the construction of the on/off ramps needed for the Brisbane North South Bypass Tunnel project. When completed, this 6.8 km long construction will be the longest tunnel in Australia.
The piers that support the ramps are being made by the formwork and scaffolding specialists PERI Australia, and consist of a headstock supported by two columns. The headstocks are fabricated in situ, by pouring concrete into pre-assembled formwork.
The formwork is positioned into place on top of the columns with the aid of some simple supporting steelwork. Bolt-on Lindapter clamps were selected as the means of assembling this girder-based supporting structure because they attach without the need to drill holes. The clamps may be moved easily, and this flexibility is critical, as the pier length and column spacings vary throughout the course of the ramps. As soon as the concrete gains enough strength, the formwork and support steelwork is stripped away, and adjusted to the dimensions needed to fabricate the following pier.
"Lindapter clamps have helped us create very cost-effective tooling for fabricating the piers required on this major project," says Fred Dagandan, Design Engineer with PERI Australia Pty Limited.
"Their ease of assembly, disassembly and adjustment, combined with special flexibility we have built into our formworks, means that we can quickly recycle. On this project, a total of some 60 piers are being constructed using just two sets of formworks."
Lindapter offers innovative solutions to your connection requirements.
Ancon is an ASSDA accredited specialist fabricator and has a wealth of experience in working with a range of types and grades of stainless steel.
Ancon is proud to announce the launch of its new company and brand logos as part of its on-going evolution.
Ancon is exhibiting at the 2016 NZ Bridges Summit on 1st - 2nd November in Auckland. The conference is endorsed by the NZ Transport Agency (NZTA) and we will be showcasing our BT range of threaded reinforcement couplers, our MBT range of bolted couplers and various Lifting Systems including our brand new EdjPro Narrow Anchor system.