
Formed & Fabricated Sections
Formed & Fabricated Sections
Section Forming
Computer controlled press brakes enable Ancon to produce a wide range of section shapes up to 5m in length and from 2mm to 20mm in thickness.
Typical shapes include:
- Angle Sections
- Zed Sections
- Channel Sections
- Lipped Channel Sections
Other shapes are available. Please contact Ancon with your requirements.

Ancillary Operations
Sections can be offered with a range of ancillary operations including laser profiling, welded stiffeners, punched holes or slots and curves. Products can be supplied with a specific surface finish to suit the requirements of the application. Services available include electro-polishing and bead blasting.
Fabricated Sections

Ancon also produces stainless steel fabricated sections. Fabrication personnel are routinely coded to BS4872 and in addition are regularly approved to BS EN 287 to weld to the procedures specific to BS EN 288.
Typical shapes include:
- I Sections
- T Sections
- Hollow Sections
Other shapes are available. Please contact Ancon with your requirements.
Latest News
Look out for Ancon at these Conferences in 2019
Ancon is proud to sponsor two industry conferences this year and will showcase an innovative range of structural fixing solutions.
Ancon Sponsors Concrete NZ Conference, Hamilton, 11th - 13th October 2018
Ancon is proud to be a sponsor of The Concrete NZ Conference taking place in Hamilton, New Zealand, from 11th to 13th October 2018.