Cast-in Channels range from simple self-anchoring slots for accepting restraint fixings to large capacity channels with integral anchors. They provide the necessary adjustment required when fixing to concrete and can eliminate site drilling. Nail holes aid the fixing of channels to timber formwork and infill prevents the ingress of concrete during casting.
Channel profiles available for casting in are: 21/18, 28/15, 38/17, 30/20, 41/27, 40/25, 49/30 and 54/33.
The Omega 21/18 is a self-anchoring channel for use with Ancon wall ties referenced _ _ 21. The shallow depth of 18mm allows the channel to be used where there is reduced cover to the reinforcement.
Ancon 30/20 is a high performance channel. Its unique shape allows the applied load to be fed directly from the channel lips to the anchors and the more compact section size improves its fit between reinforcement. Specially designed T-head bolts ride up the sloping sides of the channel and securely lock behind the front lips. This channel also accepts standard 20mm wide wall ties. 30/20 is filled with continuously extruded closed cell PE-LD foam. This material is removed easily in long sections and is 100% recyclable.
Ancon 30/20 should be used in preference to 38/17 channel. 30/20 is a high performance channel and its lower material content offers considerable cost benefits.
AnconLock has teeth cut into the returned lips of the channel. The 'T' head bolts used to fix to this channel have a matching serrated surface on the underside of the head which provides a high resistance to slip under shear load along the line of the channel.
Halfen Cast-in Channels
Ancon is also the exclusive distributor of Halfen cast-in channels in New Zealand. More information can be found here.
Leviat will become the new name for CRH’s construction accessories companies worldwide, including Ancon, from Monday 9th November 2020.
Shelf angle systems provides flexible, cost-effective design solutions for the support of masonry cladding and are designed to suit specific applications, taking into account loading, fixings position and cavity width.