The most efficient method of supporting stonework is normally for individual corbel supports to be positioned at the vertical joint between two adjacent stones.
CFA/S Corbel Angles
These are individual angles that accommodate a fixing bolt in the vertical leg. The dimensions are chosen to suit the application. The angles can also be supplied with a lip or dowels to restrain the base of each stone (Ref CFA/SL or CFA/SD).
CFA/SC Corbel Angles
These are similar to the CFA/S, but the bottom leg is inclined at 15° to provide restraint where the support has to be positioned above the base of the stone. Ancon Corbel Angles are designed to suit each application.
Ancon MDC/S System
Ancon MDC/S Stonework Supports are based on the MDC masonry support system. The bracket height and depth are varied to suit the cavity size and the loadings. The dimensions of the angle are selected to suit the stonework to be supported.
Variations of the Ancon MDC/S
MDC/SD has a dowel to restrain the base of each stone
MDC/SC has the bottom leg of the angle inclined at 15° to provide restraint where the support has to be positioned above the base of the stone.
Stonework supports may be specified as follows:
MDC / type / cavity / stone width / load
e.g. MDC / SD / 100 / 50 / 4
The Ancon SSB Bracket supports and restrains stonework with a facing thickness of between 25mm and 40mm. They can be positioned in either the vertical or the horizontal joints and allow adjustment without the need for shims.
Ancon Soffit Fixing
Ancon Soffit fixings are a simple and secure method of fixing thin facing slabs. This heavy duty support and restraint fixing comprises a stainless steel head and bolt and is quick and easy to install. The disc fixing is fully adjustable and able to support a safe working load of 600N in tension. The stone should be checked to ensure it is capable of withstanding the localised bearing stress under the disc.
Ancon is proud to announce the launch of its new company and brand logos as part of its on-going evolution.
Ancon is exhibiting at the 2016 NZ Bridges Summit on 1st - 2nd November in Auckland. The conference is endorsed by the NZ Transport Agency (NZTA) and we will be showcasing our BT range of threaded reinforcement couplers, our MBT range of bolted couplers and various Lifting Systems including our brand new EdjPro Narrow Anchor system.