Skip to content

Tie Length & Density

Tie Length & Density

Ties should be of the correct length to ensure they are properly embedded in the masonry.

The spacing of veneer ties should be in accordance with building codes or engineers' specifications. There should be a minimum 15mm cover from any exposed surface.

Cavity Width

The maximum width is 75mm and the minimum width is 40mm. Any application outside this range will be subject to specific engineering design (SED).

Remedial Wall Ties

Spacing of remedial ties will typically be subject to specific engineering design. NZS4210 provides the principal new build reference for veneer construction.

Latest News

Christmas Shutdown 2018

The Auckland and Christchurch offices will close at 12:00pm on Friday 21st December 2018 and re-open at 8:30am on Monday 7th January 2019.