The NZ Concrete Industry Conference, 6th-8th October 2016, Auckland
We are delighted to be sponsoring and exhibiting at The New Zealand Concrete Industry Conference at the Ellerslie Event Centre in Auckland. From 6th-8th October we will be showcasing our BT range of threaded reinforcement couplers, our MBT range of bolted couplers and various Lifting Systems including the launch of our brand new EdjPro Narrow Anchor system.
For more information and to register for the event please visit www.theconcreteconference.co.nz
EdjPro Narrow Anchor System
The EdjPro Narrow Anchor system is designed for use with thin precast panels from 100mm wide and is available in two shapes.
The EdjPro system was specifically developed to eliminate cracking and spalling around edge anchors. It is ideal for lifting thin factory cast panels where a high finish is required, typically visible and exterior walls. Use of the EdjPro system will ensure panels remain in their perfect factory-cast condition, avoiding remedial work and lowering overall costs.
LinkPro is a range of fibre-cored/steel-cored lifting loops to facilitate the safe and efficient handling of precast and prestressed reinforced concrete units, including bridge and shell beams.
BT and MBT Reinforcement Couplers
BT parallel threaded couplers are suited to projects which require high volumes of couplers. They produce a full strength joint and yet are one of the smallest couplers in the Ancon range. The ends of the bars to be joined are cut square and enlarged by cold forging to increase their core diameter and so ensure that the joint is stronger than the bar. The couplers are usually supplied attached to the reinforcing bar.
MBT couplers require neither bar end preparation to form threads nor bar rotation to effect installation. The bars are supported within the coupler on two serrated saddles and a line of lockshear bolts, when tightened, embed into the bars.
Ancon is proud to announce the launch of its new company and brand logos as part of its on-going evolution.
Ancon is exhibiting at the 2016 NZ Bridges Summit on 1st - 2nd November in Auckland. The conference is endorsed by the NZ Transport Agency (NZTA) and we will be showcasing our BT range of threaded reinforcement couplers, our MBT range of bolted couplers and various Lifting Systems including our brand new EdjPro Narrow Anchor system.